GatewayGateway BACnet to Modbus/ACN
Performance features:
High-performing gateway to establish a connection between the two protocols BACnet and Modbus. An integration of Modbus devices supporting the RTU protocol via RS-485 into BACnet controlled systems can be easily implemented via the BACnet gateway.
GatewayGateway KNX to Modbus/ACN
Performance features:
Compact KNX Modbus RTU Gateway with a width of max. 1 DU (18 mm) with 250 freely configurable channels (KNX data points). Easy integration of Modbus devices that support the RTU protocol via RS-485 Modbus master or slave function. The assignment betw
ACB interface module for 24 V DC BSY+ drives
Performance features:
Interface module between building management system or D+H control panel (CPS-M1) and a 24 V DC BSY+ drive group;
Expands the drive functions, for example, to include functions of precise position control and virtual group formatio
ACB interface module for 230 V AC BSY+ drives
Performance features:
Interface module between building management system or D+H control panel (CPS-M1) and a 230 V AC BSY+ drive group;
Expands the drive functions, for example, to include functions of precise position control and virtual group format
- BSY-GW 024-010-UInterface module for BSY+ drives
Performance features:
Interface module between the building management system (BMS) and a BSY+ drive group in conjunction with a D+H control panel;
Simple plug-and-play commissioning;
No special drive notification or configuration required;
Galvanic isolation betwe
in conjunction with D+H drives
Performance features:
For isolated OPEN or CLOSED signal of a drive or a drive group;
Activation via BSY+ line, BRV message or TMS output (only for CDC);
Installing in a junction box, for example (not included);
Technical data:
Power supply: 24 V DC
Contact load ca
- SSM 45Entrapment protection in conjunction with D+H 24 V DC drives
24 V DC, max. 2 contact tubes
Performance featrues:
For securing the main and side closing edges of a window in conjunction with (a maximum of 2) contact
tubes;
Automatic reversing mode;
Burglary protection, automatic deactivation of the
FS 41for overlapping window sashes
Performance features:
For consistent opening and closing of motor-operated, overlapping window sashes;
Delays the start-up of a sash side in the OPEN / CLOSED direction to guarantee safe opening/closing;
For installing on the control panel or on-site junction box;
T
Module for top hat rail installation for D+H 24 V DC drives in conjunction with D+H SHEV control panels
Performance features:
For dividing the drive connection wires of a group into 2 sections for each 3 wires;
Option of parallel connection of up to 4x GSV 45 on one group;
Installing in a junction
for SHEV control panels RZN 43xx-E
for controlling by a fire alarm control unit
Performance features:
For controlling by an upstream fire alarm control unit;
For alarm triggering and resetting the SHEV system (RZN-E) when using pulse control;
For converting continuous switch signals to pulse switc
for SHEV control panels RZN 43xx-E
for controlling by a fire alarm control unit
Performance features:
For controlling by an upstream fire alarm control unit;
For alarm triggering and resetting the SHEV system (RZN-K/-M) when using pulse control;
For converting continuous switch signals to pulse sw
Module for top hat rail installation
Performance features:
For converting continuous switch signals to pulse switching signals, e.g. in conjunction with pulse solenoid valves;
Top hat rail design;
Scope of supply:
Module incl. snap-on foot, instruction for use
Brand: D+H Mechatronic AG
Type: I
for SHEV control panels RZN 43xx-E, RZN 44xx-K/M and CNV control panels GVL 83xx-E, GVL 8408-M
e.g. in case of shading by others
Performance features:
Delays the start-up of the window drives to prevent faults when opening the sash or to prevent restrictions of the SHEV cross section due to on-sit
for SHEV control panels RZN 43xx-E and RZN 44xx-K/M
in conjunction with RT BE42-Z (K)
Performance features:
Application in conjunction with RT BE42-Z and RT BE42-Z-K;
Pluggable on line space (RM / RT);
Technical datal:
Supply: 24 V DC (18 - 28 V DC)
Scope of supply:
Module
Brand: D+H Mechatr
WFR 41for SHEV control panels RZN 43xx-E, RZN 44xx-K/M and CNV control panels GVL 83xx-E
for relaying of weather-CLOSED signal
Performance features:
Interface module for D+H wind and rain detectors;
For installation on E1 / E2 central slot;
With isolated changeover contact for relaying the weather CLOSE
- AM 44-Zfor SHEV control panels RZN 43xx-E and RZN 44xx-K/M
Performance features:
Supply of external alarm devices such as sirens, fire bells and flashing lights;
For installation on E1 / E2 central slot;
Options of manual alarm cut-off via optional collective signal panel or automatic via the preset time
Module for top hat rail installation
Performance features:
Made of 12 individual LEDs or resistors that can be wired independently;
Top hat rail design;
Scope of supply:
Module incl. snap-on foot
Brand: D+H Mechatronic AG
Type: DM 41
(
Module for top hat rail installation
24 V DC / 21.8 mA / max. 230 V AC / 5 A
Performance features:
E.g. for remote signaling fault or alarm notification;
For installation in D+H smoke extraction or ventilation control panel;
Module for top hat rail installation;
Technical Data:
Rated control vol
Module for top hat rail installation
230 V AC / 4.9 mA / max. 230 V AC / 5 A
Performance features:
E.g. for remote signaling fault or alarm notification;
For installation in D+H smoke extraction or ventilation control panel;
Module for top hat rail installation;
Technical Data:
Rated control vol
42for SHEV control panels RZN 43xx-E and RZN 44xx-K/M
max. 230 V AC / 8 A
Performance features:
E.g. for remote signalling a fault or an alarm;
For installation on E1 / E2 central slot;
Technical data:
Power supply: 24 V DC / 0.02 A
Switching capacity: max. 230 V AC / 8 A
Switching contact: 2 isol
44-KModule for top hat rail installation
24 V DC / max. 230 V AC / 720 VA
Performance features:
For controlling 230 V AC D+H drives on 24 V DC groups in D+H SHEV and CNV control panels;
Top hat rail design;
Technical data:
Input voltage: 24 V DC / ±10 %
Output voltage: max. 230 V AC
Switching capaci
8Module for top hat rail installation
24 V DC / max. 230 V AC / 720 VA
Performance features:
For controlling a 230 V AC ventilation group via isolated double changeover contact 230 V AC / 5 A;
For combining multiple ventilation groups;
For central closing function in conjunction with WRZ and WRZ 80
D+H is one of the leading global companies in the field of smoke extraction and natural ventilation. Part of this catalogue are motorised drive units for the operation of window elements as well as the appropriate control units for smoke and heat extraction and natural ventilation.
Last modified 05.01.2022 Texts 816 Pictures 431 Attachments/Documents 751
Download
E-mail
Back