HUECK Lambda WS 075 FC - Highly thermally insulated aluminium window system in façade appearance
Highly thermally insulated aluminium window design with the appearance of a slender façade design. Basic profile depth of 75 mm in the frame and 85 mm in the specific sash with narrow elevation width. Other opening sashes applicable from the WS 075 IS and WS 075 window series. Sash lap on the room side 10 mm, sash lap over the frame circumferential 6 mm. Compatible with HUECK Lambda DS 075.
Elevation width on the outside:
Fixed frame: from 50 mm
Fixed and sash frame combination: from 78 mm.
Comprehensive profile range with differently designable contour variants for interior and exterior. Can be combined with Trigon 50 cover shells.
"Lambdatherm" insulating zone with 38 mm profile depth. Heat resistant up to 180 °C.
Factory-made shear-proof composite, suitable for subsequent powder coating and anodisation.
Highly thermally insulated centre seal gasket with limit stop at the hollow-chamber insulating bridge at the sash side. Optionally with vulcanised corner piece gaskets or as vulcanised frame gasket.
Circumferential EPDM sash rebate gasket.
Chamber-forming EPDM glazing gaskets, can be drawn in circumferentially.
All gaskets with gliding polymer coating, suitable for self-cleaning glazing.
Rebate chamber drainage through slots and clip-in drain caps (plastic or aluminium) or concealed drainage.
Corner brackets and t-brackets either nailable or crimpable (with variable punch dimensions). Identical brackets for interior and exterior. All brackets suitable for subsequent glue injection. Uniform pin diameters for corner brackets and t-brackets.
Filling thicknesses up to 52 mm in the fixed area and up to 63 mm in the sash.
Opening types: turn, turn/tilt, tilt, tilt before turn, and French window
Sash sizes pursuant to catalogue.
High-quality, concealed fitting solutions.
Up to corrosion protection class 5.
Can be combined with Lambda WS 075 and WS 075 IS.
Thermal insulation: Uf depending on profile geometry ≥ 1.2 W/m²K
Water tightness: up to class 9A in accordance with EN 12208
Air permeability: up to class 4 in accordance with EN 12207
Resistance to wind load: up to class C4/B4 in accordance with EN EN 12210
Mechanical stress: up to class 4 in accordance with EN 13115
Burglar resistance: up to class RC 2 in accordance with DIN EN 1627
Design-related deviating performance properties on request.