HUECK Lambda WS 090

HUECK Lambda WS 090 - Aluminium window system at passive house standard

Highly thermally insulated aluminium window construction with a profile depth of 90 mm (frame) and 100 mm (sash), sash cuff on the room side 10 mm. Sash lap over the frame continuous 6 mm.
Insulating zone with 53 mm profile depth consisting of glass-fibre reinforced polyamide 6.6 strips, heat-resistant up to 180 °C.
Factory-fitted shear-proof composite, suitable for subsequent powder coating and anodising, prepared for subsequent sliding in of insulating cores.

Intelligent modular system with modular construction for various requirements on thermal insulation.
Slim elevation widths of the frame and sash profiles combination from 93 mm.

Highly thermally insulating centre seal gasket with vulcanized gasket corners.
Continuous EPDM sash rebate gasket.
Chamber-forming EPDM glazing gaskets, can be drawn in continuously.
All gaskets coated with sliding polymer, suitable for self-cleaning glazing.

Rebate chamber drainage by means of slots and clip-on drain caps (plastic or aluminium) or concealed drainage.
Corner and t-brackets either nailable or crimpable (with variable punch dimensions). Identical t-brackets internally and externally. All t-brackets can be subsequently bonded. Uniform pin diameter for corner and t-brackets.

Glass thicknesses from 24 to 72 mm.

Opening types and sash sizes as per catalogue documents.
High-quality, concealed fittings solutions.
Up to corrosion prevention class 5.

Thermal insulation: Uf from 0.7 to 1.2 W/m²K depending on the profile geometry

Water tightness: up to Class E1200 in accordance with EN 12 208

Air permeability: Class 4 in accordance with EN 12 207

Resistance to wind load: up to Class C5/B5 in accordance with EN 12210

Burglar resistance: up to Class RC3 in accordance with EN 1627 .

Article number: lambda90

Manufacturer's information

Loher Str. 9 58511 Lüdenscheid

Tel. +49 (0)2351 151-0
Fax +49 (0)2351 151-283
Category Profile systems

Producer and supplier of aluminium profile systems for window-, door- and facade applications

Last modified 01.04.2019   Texts 401   Pictures 32