HUECK Lambda 65 M IF

HUECK Lambda 65 M IF - integrated aluminium windows

Thermally insulated window construction with integrated sash, a profile depth of 65 mm (frame) and 69 mm (sash), sash lap over the frame 11 mm on the room side. Insulating zone with 23 mm profile depth made of glass fibre-reinforced polyamide 6.6 strips, heat-resistant up to 180 °C. Factory-mounted shear proof composites, suitable for subsequent assembly painting and anodization.

EPDM multi-chamber centre seal gasket with limit stop on the hollow chamber insulating bridge on the side of the sash, alternatively with vulcanized gasket corners or as vulcanized gasket frames. The chamber-forming EPDM glazing gasket, on the inside flush with the glazing bead, in the corners continuing, is at the top horizontally jointed and stuck together. Glazing of the sash on the outside with vulcanized EPDM gasket frame. Rebate chamber drainage via slots and snap-in drain caps (plastic or aluminium) or concealed.
Mitre joints with corner brackets in outer and inner shell. Corner stabiliser for sash limit stop. Transom connections with inner and outer t-brackets.

Opening types and sash sizes as per catalogue.

Thermal insulation: Uf depending on profile geometry up to 1.8 W/m²K

Water tightness: up to Class 9A according to EN 12208

Air permeability: Class 4 according to EN 12207

Resistance to wind load: up to Class C4/B5 according to EN 12210

Burglar resistance: up to class RC3 in accordance with EN 1627

Article number: lambda65mif

Manufacturer's information

HUECK GMBH & CO. KG
Loher Str. 9 58511 Lüdenscheid

Tel. +49 (0)2351 151-0
Fax +49 (0)2351 151-283
E-Mail info@hueck.com
Internet  www.hueck.com
Category Profile systems

Producer and supplier of aluminium profile systems for window-, door- and facade applications

Last modified 01.04.2019   Texts 401   Pictures 32