HUECK Lambda 65 M

HUECK Lambda 65 M - thermally insulated aluminium windows

Thermally insulated window construction with profile depth of 65 mm (frame) and 67 mm (sash), sash lap over the frame 11 mm on the room site. Insulating zone with 23 mm profile depth maximum, made of glass fibre-reinforced polyamide 6.6 strips, heat resistant up to 180°C. Factory-mounted shear proof composites, suitable for subsequent assembly painting and anodization.

EPDM multi-chamber centre seal gasket with limit stop on the hollow chamber insulating bridge on the side of the sash, alternatively with vulcanized gasket corners or as vulcanized gasket frames. Continuous EPDM sash rebate gasket. The chamber-forming EPDM glazing gasket, on the inside flush with the glazing bead, in the corners continuing, is at the top horizontally jointed and stuck together.

A groove of 25 mm minimum in the blind frame ensures a solid fixing possibility of hardware and frame dowels. Glazing beads to clip in as closed hollow profiles. Rebate chamber drainage vie slots and snap-in drain caps (plastic or aluminium) or concealed. Mitre joints with self-adjusting corner brackets, suitable for subsequent gluing in inner and outer shells. Corner stabiliser for sash limit stop. Transom connections with inner and outer t-brackets and with integrated gasket.

Opening types and sash sizes as per catalogue.

Thermal insulation: Uf depending on profile geometry up to 1.9 W/m²K

Water tightness: up to Class E1050 in accordance with EN 12208

Air permeability: Class 4 according to EN 12207

Resistance to wind load: up to class C5/B5 in accordance with EN 12210

Burglar resistance: up to class RC3 in accordance with EN 1627

Article number: lambda65m

Manufacturer's information

Loher Str. 9 58511 Lüdenscheid

Tel. +49 (0)2351 151-0
Fax +49 (0)2351 151-283
Category Profile systems

Producer and supplier of aluminium profile systems for window-, door- and facade applications

Last modified 01.04.2019   Texts 401   Pictures 32